The 3rd version of the HxC Floppy Emulator Manager is available.
It's a complete rewrite of the original software.
It features a new user interface (thanks Ced !), better support of the HxC Floppy Emulator device (detection, release..) and some critical bug-fixes.
Finally, it now allows proper exit to BASIC (Amstrad CPC's default shell).
The software remains available as a ROM.
A new Amstrad CPC firmware is available, written by Syx and TotO.
This Firmware was designed to get a better support of RAM and ROM expansions. Looking the future, not the past.
It don't work with BASIC 1.0 and no more support Tape by default. (need a ROM to manage it, that allow to improve it as new storages too).
So, the actual target is all CPC with BASIC 1.1 and floppy or HxC drives.
New features are :
Beware, you must use the 16 Ko files with an emulator. 32 Ko ROMs are to be used with a real Amstrad CPC.
As much as we love our Amstrad CPC, the sound we get with the General Instrument AY-3-8912 sound chip isnt the bestone on 8bit computers. Happily it's possible to get a better sound with either a Digiblaster, an Amdrum or a Music Machine.
The first version of the Digiblaster was designed by Face Hugger (Interview of Face Hugger by NoRecess) and printed in the German magazine CPC Amstrad International in issue 8-9/1991. It's a small hardware device plugged into the CPC's printer portto play 8-bit mono sound samples. Joshua made a redesign for better sound quality (electronic printout of Digiblaster v1 and v2 here).Then there is new Digiblaster by Futurs : the SoundPlayer and the SoundPlayer+ (VN96 network included). The SoundPlayer+ was replaced later by the SoundPlayerNG.
The digiblasters v1, v2 and SoundPlayer(+/NG) can be connected to passive mono speakers.
A few months back, Bryce made a redesign with even better sound quality : the Digiblaster v3. You can feed the AY output through the card so that both sound sources are played through the same speakers. The DigiBlaster has been made dual-mono so that both speakers play the sample as is done withthe AY-3-8912 Channel B. The AY and Digiblaster sound levels are balanced. You must use active stereo speakers.
You can write music using the Digiblaster with :
At least 2 Amstrad CPC demos did use the Digiblaster : Bordelik Demo 4 (1995) and Digital Orgasm (1994).
The Amdrum has been made by Cheetah, but it uses the expansion connecter. It can also play 8bit samples like the Digiblaster, and was advertised as a drum synthesiser. You can check the youtube video of the Amdrum being used with the JavaCPC emulator.
A third device which I found on CPCWiki : the Music Machine, using the expansion connector like the Amdrum. Another hardware letting play sound samples, designed by Flare Technology andmanufactured by RAM Electronics. It could record sound with a microphone.
There is an interesting article on Octoate which shows how to add a bluetooth module on the CPC Booster+ made by Antitec.
Informations, software and manual for the CPC Booster+ are available on CPC Wiki.
The Unity project by Bacteria is ambitious, to make an all in one video game console (see Hack a Day).
At the moment, you have the following video game consoles inside :
And he is working on adding others consoles, including our Amstrad GX4000 !
Well they do it already on a MSX, and the electronic plan is available.
Two MSX games were adapted to run using the Nunchuck controller. The games are Konami's Road Fighter and Ping Pong. The machine used is a Brazilian HOT BIT with a do-it-yourself Assembler cartridge. A Basic program loads the game and the nunchuck driver and then applies the patch. The driver can detect a Nunchuck in either joystick port and reverts to the standard port when no nunchuck answers.
A new forum for the Amstrad Notepad (NC100, 150 and 200), PCW and PDA600 is available on CPCwiki.
To help using your HxC floppy emulator, vous can use the last version of the HxC Floppy Emulator Manager (v2.3) by NoRecess.
It's now faster to launch, spaces in directory names can now be used, and the user interface is now using the default system font with new color scheme (aligned to ParaDOS and QuickCMD's ones). As previous releases, ROM version is also available.
Remember the CPC+ modded by DeepFB ?
Here is another mod of a 464+ by Badstarr, with 128 Ko and of course the ubiquitous HxC floppy emulator.
P.S. : go read the source of this news for more photos at the page 2.
Inside the modded 464+, there you see the HxC floppy emulator and the whole SD card.
Here is the bottom, you can see a tiny part of the SD card from the hole.
Bryce has released his MegaFlash, a new 512 Ko ROMBOX to be able to use ROMs like QuickCMD on your Amstrad CPC. You can PM him on CPCWiki quickly if you want to be able to order one.
The price is 75 €, centronics cable 7 €, edge connector cable 10 € and postage 5 €.
If you arent afraid of some blood, here are 3 photos of the inside of a modded Amstad CPC with 2 CRTC. Which make me wonder what would be a heavily modded Amstrad CPC that everybody would love to own. If you have some ideas, write it in the thread I opened on CPCWiki.
Amstrad Expo is no more, but rejoice as ReSeT #0 is the new name of the Amstrad meeting organized by the tireless Eliot.
As usual you can expect a warm welcoming, good food, not much sleep (except if you are a sissy and use a bed), 4 competitions :
CPC Hardware will be given for free at the party-place: monitors, keyboards, floppy-drives, floppy-discs... All the parts from CPCParts.net will be available to repair and upgrade your CPC with the help of hardware specialists.
The ReSeT Party will take place from Friday 24th (10:00) to Sunday 26th of June 2011 (18:00) at Foyer des Jeunes Travailleurs in Coutances. The price is 11 euros per day for the entrance, drinks and food. You can book a double room at the party place for 20 euros per night.
Please use the ReSeT #0 site to register if you intent to come, thanks in advance.
See below for a nice modded Amstrad CPC+ with the SDCard HxC floppy emulator and Symbiface by Deepfb :
First, you should download the latest firmware of the SDCard HxC floppy emulator, the v1.3.11.0 corrects some timing problems with Asic 3 (CPC+) and 4 (pre-CPC+), and some bugs. It's best to freshly format (FAT32) your SD card, then copy the *.upd and *.cfg to the card. Press Left and Right buttons before power up and keep it pressed at least 1 seconds at power up. Wait some seconds, it's done.
There is now an Amstrad CPC program to directly choose an image. This program (just run"hxc) is in the autoboot.hfe disk image. By pressing the middle button, the autoboot.hfe disk is automatically selected. It has been compiled with Small Device C Compiler and still need to be optimized (slow drawing using system calls). The program has been converted to a ROM by Krusty, but as the original program is changing fast at the moment, it could be a bit early to download it.
Need some Amstrad CPC parts ? Well time to go on Eliot's shop !
Rules of this useful shop :
- parts are aimed to be used in the CPC community or any other 8bits friendly community,
- some parts are rare so please order only what you really need,
- please do not resell parts you got from the site.
For more news, Go to home page