You can download 19 MIDI songs by Manfred GROSS which can be read by the Ultimate CPC MIDI Sound and MIDI Interface by LambadMikel for your Amstrad CPC.

The Picomem ISA card created by FreddyV is for all 808x computers and brings additionnal RAM (if you don't have 640 Kb), EMS memory, hard disk and disk drive images support, thanks to a Raspberry Pico (like the PicoGUS sound card). It's still work in progress. Rodrik Studio did two videos about the Picomem, one in english, the other in french :

• english video
• french video (see below)

Seen on CPCWiki, it is possible to replace an AY-3-8912 original sound chip (originals for sell are costly) by a replacement chip created by vRetro Design (better to put the chip in a socket after removing the original) : AY-3-8912 functional equivalent for 25 euros.

There is another replacement chip : AY-3-8912A-TS (Turbo Sound) but contrary to what was thought at the start of the CPCWiki thread, it isn't usable on an Amstrad CPC. It's only for ZX Spectrum and it offers 2 AY instead of one.

The clone had a timing problem but it has been corrected by vRetro on the 12 October 2023 as announced by SerErris.

And one more computer running soon SymbOS by Prodatron : the Amstrad Notepad 200 !

If you wish to try it with an emulator, you can download a version of the 18th July 2023.

Prodatron's notepad NC200 being out of order, it lacks for the moment the possibility to start on a real NC200.

Longshot has released version 1.6 of the Amstrad CPC CRTC Compendium (July 2023) which is a documentation about the CRTC 6845 (and some others circuits). Note that the CRTC is a generic component used in several computers including the IBM PC.

It is possible to check if an emulator is good with the SHAKER tests by Longshot. SHAKER is a program designed to run on CPC machines produced by AMSTRAD in the 80s-90s. The objective of this program is to carry out extensive tests on the video circuits of this machine. These video circuits are the GATE ARRAY and the CRTC 6845. AMSTRAD produced several series of GATE ARRAY and used CRTC models produced by different manufacturers (HITACHI, MOTOROLA, UMC, AMSTRAD). This has been causing compatibility problems on operations that exceed the functional specifications of these circuits. The identified CRTCs are numbered from 0 to 4.

Lee Smiths Workshop has done a video to use a retro keyboard (including an Amstrad CPC 464) as an USB Keyboard thanks to a Raspberry Pico. The code is available on this Github.

First announced in a tweet, the modula Amstrad CPC by Bread80 is presented by himself in the CPCWiki forum with more informations.

Why playing to Amstrad CPC games with a keyboard or a joystick (original or USB) when you can play differently : with an IR remote control ? It's what has done Poulette73 but you will need the RSF3 expansion by TMTLogic. And the programs must be adapted as you will see in two videos :

• Tetris DotBAs (Francesc ALCAUCER) (see below)
• Nibbler (Mosaik Software) and Devil Highway (L.M.C. Software)

Poulette73 is presenting the RSF3 on CPCRulez.

Michael Wessel is the author of several hardware expansions for Amstrad CPC which I let you discover on his github and Youtube channel.

His last making is the MegaLambda-x6(++), an Amstrad CPC expansion backplante with no less than 6 slots. You can desactivate individually each connected card. It features :

• Six standard MX4 expansion slots
• Passthrough edge connector (like LambdaBoard I, II)
• Passthrough pin header connector (like MotherX4)
• Keyhole in edge connector for hardware that requires it (e.g., DKTronics Retro Speech Synthesizer, ...)
• Wide signal traces for good signal conductivity
• Extra wide traces for GND and VCC - unlike other backplane expanders for the CPC, MegaLambda is capable of powering the DDI-1 and DDI-3 without requiring an extra power supply
• Backplane powered from either the CPC or an external 5V power supply via standard barell jack (center polarity positive)
• Double jumpers (for better conductivity) to select between CPC power and external power
• Power LED (only) if external power supply is used - polarity check!
• The 5V / VCC line of the CPC expansion port is physically disconnected from the backplane if external power is used; only GND is shared with the CPC
• CPC Reset button

Several presentation videos are available :

• the initial presentation by LambdaMikel (see below)
• the second presentation by LambdaMikel of the upgraded MegaLambda
• the presentation of Manfred Gross's Amstrad CPC which is using the MegaLambda to connect the Ultimate Midi card (also by LambdaMikel), the RSF3 by TMTLogic, and much more !

Vexed by Under4Mhz is a new puzzle game for Amstrad CPC at the first 2023 semester. Match blocks and dont leave one or you must start anew the level.

Since the initial release, joystick support has been added in v1.08, so you should better download it again if you like Vexed.

Bread80 has several project, the latest one is a modular Amstrad CPC using a modified backplane of a RC2014 (Z80 based computer) !

The C4CPC isn't made anymore by Gérald due to lack of time and exploding costs (x3).

But the Backbit Pro could be a possible replacement. Beware it's more than 100 dollars, but you also have the to buy the corresponding Amstrad CPC+/GX4000 adaptater :

• the adaptater has a chip for ACID protection bypass
• The adapters include a solderless jumper (one jumper is included, and extra jumpers can be purchased, required for ACID bypass)
• 3.5mm jack allows connecting a BackButton (to move back in the menu without touching the backbit pro, some systems such as Amstrad require an included solderless jumper) or a GenAssister
• Supports cartridge images (BIN/CPR) up to 1MB in size
• Real-time-clock remembers date & time even after shutoff. Useful when creating new files or versions
• One-button diagnostic mode helps you identify system faults (on most systems)
• Upgradeable via MicroSD card

Ikonsgr has released new firmware for his expansion cards USIfAC II and ULIfAC . THe ULIFAC is the last iteration of his card which started with the USIfAC 1.

The 4th version of the HxC Floppy Emulator Manager is available.

It features :

• User can now edit up to 20 slots (previous version: 15 slots was the max.)
• New UI, removed the old "demomaker style" presentation, now displaying more files on screen (with longer filenames)
• DEL key added to move back to parent folder while navigating
• The manager now skips DSK files when using a HxC SD/Slim device
• The Help page now reports the firmware version + build date of the Manager
• Switched compilation to SDCC 4.2.0 (resulting better Z80 implementation)
• Now compiled using RASM from roudoudou (previous version: Pasmo)
• Now compressed using ZX0 packer (previous version: the good old Bitbuster)
• Smaller binary (11KB) resulting a faster load from BASIC prompt (previous version: 16KB)

It remains compatible with the 64KB RAM-based machines, and the ROM version is sdirectly available into the AUTOBOOT.HFE file.

Rodrik Studio has done another video, the second about using an Amstrad PC 1512 without its original monitor (WIP), following the first video where he was using a breadboard.